Brickcom FB-100Ap Series Hardware User Manual page 11

/ +12V*
/ +12V*
/ +12V*
*V5&V6 (WDRPro & Star & StarPlus) Series Supported
Hardware Reset
The Reset Button can be used to reboot the camera, restore it to factory default settings,
or switch on FocusEasy. If the camera experiences a problem, rebooting the camera
may correct the problem. If the problem remains, please restore the camera to factory
default settings and reinstall the software.
To Start/Cancel FocusEasy
To Start FocusEasy, please press and hold the reset button for 2-3 seconds. The camera
will play the melody indicating FocusEasy is already started. Then follow the beeps to
adjust the focus. To cancel FocusEasy, please press and hold the reset button again for
2-3 seconds. The camera will play another melody indicating FocusEasy is already shut
down.
NOTE -
FocusEasy is supported only on the V5 professional manual-focal
10