Philips KV-S5055C Service Manual page 95

9.3.6. Test
Item
LED 1. Click "LED" on the main menu.
2. Click "START" on "LED" dialog box to start LED Test
continuously until clicking "STOP".
3. Click "Close" to return to the main menu.
Key / Sensor 1. Click "Key / Sensor" on the main menu.
2. Check the key and sensor status on the "Key / Sensor"
dialog box.
3. Click "Close" to return to the main menu.
Sensor Sensitive 1. Click "Sensor Sensitive Level" on the main menu.
Level 2. Check each sensor's sensitive level (Offset, Slice) on the
Sensor Sensitive Level dialog box.
3. Click "Close" to return to the main menu.
Feed Motor 1. Click "Feed Motor" on the main menu.
2. Click "START" on the "Feed Motor" dialog box to start to
rotate Paper Feed Motor periodically controlled in the
paper-feed direction and its reverse direction until clicking
"STOP".
Note:
• Rotating in the paper-feed direction will allow the Paper
• Rotating in the reverse direction will allow the Paper
3. Click "Close" to return to the main menu.
Conveyor Motor 1. Click "Conveyor Motor" on the main menu.
2. Click "START" on the "Conveyor Motor" dialog box to start
to rotate Conveyor Motor continuously until clicking "STOP".
3. Click "Close" to return to the main menu.
DFP Pressure 1. Click "DFP Pressure Drive" on the main menu.
Drive 2. Click "START" on "DFP Pressure Drive" dialog box to start
to rotate DFP Pressure Motor continuously until clicking
"STOP".
3. Click "Close" to return to the main menu.
Gate Drive 1. Click "Gate Drive" on the main menu.
2. Click "START" on the "Gate Drive" dialog box to start
to execute the open/close operation of the gate until clicking
"STOP".
3. Click "Close" to return to the main menu.
Operation
Feed Roller Module to go down to perform the paper-feed
function.
Feed Roller Module to rise to perform the
paper-separation function.
Default
95
Remarks
— Each indicator turns on or off
in a constant period.
—
—
—
—
—
—