Summary of Contents for Philips SpeechMike Pro 6184
SPEECHMIKE SPEECHMIKE 6184 6184 INSTALLATION AND USER MANUAL...
SpeechMike is a trademark of Philips. DISCLAIMER AND NOTICES Philips Speech Processing has carried out extensive testing with most popular configurations. However, since PC add-ons and drivers change very rapidly, we are unable to guarantee conflict-free operation. Possible solutions for solving such conflicts can be found in the Readme file.
For the latest version of the SpeechMike software package, please contact your software vendor. For additional information on professional speech processing and speech recognition solutions from Philips Speech Processing, please visit our web site at: http://www.speech.philips.com For further information, please refer to the "World-Wide Service Information" booklet...
SpeechMike Pro Barcode Reader Installation and User Manual Installation System requirements • IBM-compatible PC • Minimum of 32 MB RAM recommended • Sound Blaster or compatible sound card • SPK OUT connector that supports passive speakers • Windows 98, Windows Me, Windows 2000, Windows NT 4.0 or Windows XP Hardware installation Follow these steps when installing the SpeechMike Pro hardware: 1.
SpeechMike Pro Barcode Reader Installation and User Manual The SpeechMike Pro software is delivered on a CD. When you insert the SpeechMike CD into your CD-ROM drive, autorun.exe is started. Select Install to begin the installation. If this program is not run when you insert the SpeechMike CD, start setup manually by doing the following: 1.
Decoder&Scanner Programming Manual that is provided with this package. DISCLAIMER Philips is not liable for problems that may occur if the SpeechMike Pro LFH 6184 is not used as described in the Decoder&Scanner Programming Manual and the user documentation delivered with the device.
SpeechMike Pro Barcode Reader Installation and User Manual Testing the Installation 1. Go to the Start menu and select Settings, Control Panel. 2. Double-click the Mouse icon; the Mouse Properties dialog box appears. 3. Open the SpeechMike tab and click the Test button. The following screen appears: You can now check if the SpeechMike Pro buttons are working correctly by pressing each button;...
SpeechMike Pro Barcode Reader Installation and User Manual SpeechMike Settings You can make settings for the SpeechMike Pro in the Windows Control Panel. 1. Go to the Start menu and select Settings, Control Panel. 2. Double-click the Mouse icon; the Mouse Properties dialog box appears. 3.
SpeechMike Pro Barcode Reader Installation and User Manual Cleaning the Trackball 1. Turn the retainer ring counterclockwise to remove the ball. 2. Wipe the ball with a clean, lint-free cloth. 3. Blow carefully into the ball cage to dislodge dust and lint.