8.4.13. Paper Feed Motor
1. Remove the Imprinter Door. (See 8.3.1.)
2. Remove the Top Cover. (See 8.4.8.)
3. Remove the screw (a) and 2 screws (b) that fasten the Motor
Bracket in place.
4. After releasing the connector wires from the clampers,
disconnect the connector to the Paper Feed Motor that is being
held by the bracket.
5. Remove the 2 screws to release the Paper Feed Motor from
the bracket.
8.4.14. PAPER FEED SELECT SENSOR Board
1. Remove the Imprinter Door. (See 8.3.1.)
2. Remove the Top Cover. (See 8.4.8.)
3. Remove the screw to release the PAPER FEED SELECT
SENSOR Board with the plate from the scanner.
59