Philips KV-S5055C Service Manual page 78

8.5.21. Optical Unit Back
1. Remove the Conveyor Motor. (See 8.5.20.)
2. Remove the 2 screws that fasten the Optical Unit Back to the
scanner.
3. Pull the unit horizontally and forward to remove it.
4. Disconnect the 2 connectors to release the unit from the
scanner.
Reassembling Note:
Be sure to assemble the unit so that the claws of the
unit can be matched with the square holes of the
scanner.
After removing the Conveyor 1, check whether the claws
are properly inserted in the holes.
78