List Of Functions For Service Utility - Philips KV-S5055C Service Manual

9.2.

List of Functions for Service Utility

Service Utility item list is as follows.
Note:
When two or more scanners are connected to a PC, execute "Select Scanner" to specify the scanner before evaluating.
The procedure is as follows.
1. Click "Select Scanner" on the main menu.
2. Select the product number of the scanner to evaluate.
Item
*2
Scanner Status
*2
Scanner Information
Scanner Counter
Update All Counters
Clear Counter
(After Clean Roller)
Clear Counter
(After Replace Roller)
Scanner Condition Sleep Mode
Clean Imprinter
Buzzer Setting
User Shading
Caution Setting
Set Default
Test LED
Key / Sensor
Sensor Sensitive Level
Feed Motor
Conveyor Motor
DFP Pressure Drive
Gate Drive
Feed
Sleep Mode
CCD Level
Image Sensor Output
Double Feed
Memory
Ionizer
Used to indicate scanner status (Ready, Error, or Caution)
Used to indicate scanner information such as Model, firmware
version, board revision, memory size, interface, Interface
condition, etc.
Used to update the values of System Counter, Cleaning Roller
*2
Counter, and Replacing Roller Counter
Used to reset the Roller Cleaning Counter to zero after cleaning
*2 the rollers
Used to reset the Roller Replacement Counter to zero after
replacing the rollers
*2
Used to set "Waiting Time" before entering the Sleep Mode
*2
*1 *2 Used to clean the ink jet head of the imprinter
Used to set the Buzzer ON/OFF condition
*2
Used to execute shading correction at the user side, or to restore
*2
the shading data to the default (Factory-setting)
*2 Used to set the number of the document scanning that enables
the Service Utility to inform the caution information (roller
replacement timing and roller cleaning timing)
Used to set "Sleep Mode", "Caution Setting", and
"Feed Speed" to the default
Used to periodically light the indicators on the front cover
Used to do keys' or sensors' ON/OFF test
Used to check the status (Offset level, Slice level) of each Sensor
(Waiting, Slip Detect, Starting, Exit)
Used to check the operation of the motor periodically rotating in
the paper-feed direction and its reverse direction
Note:
• Rotating in the paper-feed direction will allow the Paper
• Rotating in the reverse direction will allow the Paper Feed
Used to check Conveyor Motor rotation
Used to check DFP Pressure Motor rotation
Used to check the open/close operation of the gate by rotating
the Conveyor Motor in the paper-feed direction or its reverse
direction.
Used to check paper feed condition
Used to check whether the sleep mode function works properly
Used to check the peak output-level after setting CCD lighting
level on each side
Used to check whether CCD operates normally by outputting the
CCD's output level or whether a dust is attached on the Scanning
Glass
Used to check the level of the Double Feed Detector (R)
(Response level) after setting the ultrasonic emission level of the
Double Feed Detector (G)
Used to execute memory R/W test
Used to check whether ON/OFF (Enable/Disable) control to
output Ionizer properly operates.
Purpose
Feed Roller Module to go down to perform the paper-feed
function.
Roller Module to rise to perform the paper-separation
function.
87
Remarks
2
2
1, 6
1, 6
1, 6
1
6
1
4
1, 3
3
5
5
5
5
5
5
5
5
5
5
5
5
5
5