Philips KV-S5055C Service Manual page 93

9.3.3. Scanner Information
This function provides various types of scanner information to the user or service-person. Main contents are as follows.
1. Model
2. Firmware Version
3. Board and Gate Array (LSI) versions
4. Memory size for front and back sides
5. Interface
6. Imprinter condition
7. Flatbed Option Enable/Disable
9.3.4. Scanner Counter
Item
Update All 1. Click "Update All Counters" to update the counters' values.
Counters 2. Confirm the value of the "System",
"After Clean Roller", and "After Replace Roller" are also
updated on the main menu (Service Utility).
Clear Counter 1. Click "Clear Counter" for "After Clean Roller" on the main
(After Clean menu.
Roller) 2. According to the message on the display, click "OK" to clear
the cleaning roller counter.
3. Confirm that the counter value is zero on the main menu.
Clear Counter 1. Click "Clear Counter" for "After Replace Roller" on the
(After Replace main menu.
Roller) 2. According to the message on the display, click "OK" to clear
the roller replacement counter.
3. Confirm that the counter value is zero on the main menu.
Operation
93
Default Remarks
—
— After cleaning rollers (Paper
Feed, Separation, DFP
Rollers, and so on), execute
this item.
— After replacing rollers (Paper
Feed, Separation, and DFP
Rollers), execute this item.