11
SERVICE WORK ON THE CHASSIS
11.39
Checking the frame
11.40
Checking the swingarm
11.41
Checking the routing of the throttle cable
–
Check the frame for cracking and deformation.
»
If the frame exhibits cracking or deformation due to a mechanical impact:
–
Change the frame.
M01118-01
–
Check the swingarm for damage, cracking, and deformation.
»
If the swingarm shows signs of damage, cracking, or deformation:
–
Change the swingarm.
500285-01
Preparatory work
–
Remove the seat. (
(All 125/150 models)
–
Turn handle
(Figure M01127-10
(250 SX)
–
Turn handle
(Figure B02072-10
(All XC models)
–
Turn handle
(Figure L00904-10
–
Remove the fuel tank.
Info
A frame that has been damaged due to a mechanical impact must
be replaced. Repair of the frame is not authorized by KTM.
Info
A damaged swingarm must always be changed. Repair of the
swingarm is not authorized by KTM.
p. 56)
of the fuel tap to the OFF position.
p. 14)
of the fuel tap to the OFF position.
p. 14)
of the fuel tap to the OFF position.
p. 14)
(
p. 63)
71