Removing The Air Filter Box Cover - KTM 125 SX Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.22

Removing the air filter box cover

–
Mount and tighten screws
Guideline
Remaining screws, chassis
M01156-10
(All 250/300 models)
–
Mount the front seat on to the collar bushing of the fuel tank, lower it at the
rear, and simultaneously push it forward.
–
Make sure that the seat is correctly locked in.
L00950-01
–
Mount and tighten screw
Guideline
Remaining screws, chassis
M01188-10
(All 125/150 models)
Condition
The air filter box cover is secured.
–
Remove screw
M01158-10
–
Pull off the air filter box cover in area
front.
M01158-11
(All 250/300 models)
Condition
The air filter box cover is secured.
–
Remove screws
B02101-10

.
M6

.
M6

.

sideways and remove it toward the

.
57
10 Nm
(7.4 lbf ft)
10 Nm
(7.4 lbf ft)