Installing The Fuel Tank - KTM 125 SX Owner's Manual
Hide thumbs
Also See for 125 SX:
- Owner's manual (135 pages) ,
- Owner's handbook manual (45 pages) ,
- Owner's manual (123 pages)
Table of Contents
Advertisement
11
SERVICE WORK ON THE CHASSIS
11.33
Installing the fuel tank
Danger
Fire hazard Fuel is highly flammable.
–
Never refuel the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no
fuel is spilt, especially on hot vehicle components. Clean up spilt fuel immediately.
–
The fuel in the fuel tank expands when warm and may emerge if overfilled. Follow the instructions on refueling.
–
Remove screw
–
Pull the hose off the fuel tank breather on the tank lid.
M01164-10
–
Pull both spoilers off of the sides of the radiator bracket and lift off the fuel
tank.
M01182-01
(All 250/300 models)
–
Pull off the fuel hose.
–
Remove screws
M01185-10
–
Remove screw
–
Pull the hose off the fuel tank breather on the tank lid.
L00951-11
–
Pull both spoilers off of the sides of the radiator bracket and lift off the fuel
tank.
M01186-01
with the rubber bushing.
Info
Remaining fuel may flow out of the fuel hose.
with the collar bushings.
with the rubber bushing.
64
Advertisement
Table of Contents
