Adjusting The Compression Damping Of The Fork - KTM 125 SX Owner's Manual

10 TUNING THE CHASSIS
10.14

Adjusting the compression damping of the fork

Info
The hydraulic compression damping determines the fork suspension behavior.
–
Mount the protection cap.
Finishing work
–
Remove the motorcycle from the lift stand. (
(125/150 SX EU)
–
Turn adjusting screw
–
Turn counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Compression damping
M01115-10
Comfort
Standard
Sport
(250 SX EU)
–
Turn adjusting screws
–
Turn counterclockwise by the number of clicks corresponding to the fork type.
Guideline
M01187-10
Compression damping
Comfort
Standard
Sport
(125/150 SX US, All XC models, 250 SX US)
–
Turn the white adjusting screw
–
Turn counterclockwise by the number of clicks corresponding to the fork type.
102142-11
 clockwise all the way.
Info

The adjusting screw is located at the upper end of the right fork leg.
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.

clockwise all the way.
Info
Adjusting screws  are located at the top end of the fork legs.
Make the same adjustment on both fork legs.
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.

Info

The adjusting screw is located at the upper end of the left fork leg.
The compression damping is located in the left fork leg COMP (white
adjusting screw). The rebound damping is located in the right fork
leg REB (red adjusting screw).
p. 44)
20 clicks
17 clicks
12 clicks
14 clicks
12 clicks
10 clicks
all the way clockwise.
40