Before Initial Use General Information - Auriol Z29962C Operation And Safety Notes

Before Initial Use
Q
General information
Q
m C AUtIOn! When choosing where to position
the weather station, make sure that it is not
exposed to direct sunlight, vibrations, dust, heat,
cold or moisture. Do not place the weather
station or external sensor near to heat sources,
e.g. radiators, as this may result in damage to
the instruments.
j
D o not place the devices near sources of inter-
ference such as television sets, computers, thick
walls, thermopane windows etc. Otherwise the
transmission of radio waves between the devices
may be impaired.
j
P lease ensure that neighbouring devices are not
operated at the same frequency of 433 MHz.
Such devices may cause interference to the
radio connection.
j
D o not place the devices next to or on metal
plates. Otherwise the quality of radio wave
transmission may be reduced.
radio signal (DCF):
The DCF signal (time signal transmitter) is made up
of time pulses transmitted from one of the highest
precision clocks in the world close to Frankfurt / Main
in Germany - it varies by 1 second in 1 million years.
In ideal conditions, your weather station can pick
up this signal over a distance of up to approx.
1,500 km around Frankfurt / Main.
GB/MT 77