Weather Station; External Sensor; Setting Up The Weather Station - Auriol Z29962C Operation And Safety Notes

Weather station

Q
j
M ark the position of the hole (ø approx. 7 mm)
on the wall.
j
D rill the hole with an electric drill.
j
I nsert the dowel
j
U sing a crosshead screwdriver, screw the
screw into the dowel
24
j
H ang the weather station by placing the hanger
on the screw
20

External sensor

Q
j
M ark the position of the hole (ø approx. 5 mm)
on the wall.
j
D rill the hole with an electric drill.
j
I nsert the dowel
j
U sing a crosshead screwdriver, screw the
screw into the dowel
29
j
H ang the external sensor by placing the
hanger on the screw
26
note: Choose a sheltered position for the external
sensor, not directly near the weather station (e.g.
separated by a wall). Ensure that the external sensor
does not come into contact with water or direct
sunlight. Electronic devices may adversely affect
the wireless signal reception.

Setting up the weather station

Q
j
P lace the stand
weather station.
80 GB/MT
into the drilled hole.
23
.
23
.
24
into the drilled hole.
28
.
28
.
29
on the underside of the
22