Before Initial Use; General Information - Auriol Z31743A Operation And Safety Notes

Put the batteries first into the outdoor
sensor, then into the weather station.
the weather station, make sure that it is not exposed
to direct sunlight, vibrations, dust, heat, cold or
moisture. Do not place the weather station or exter-
nal sensor near to heat sources, e.g. radiators, as
this may result in damage to the instruments.
Radio signal (DCF):
The DCF signal (time signal transmitter) is made
up of time pulses transmitted from one of the high-
est precision clocks in the world close to Frankfurt /
Main in Germany – it varies by 1 second in 1 mil-
lion years.
In ideal conditions, your weather station can pick
up this signal over a distance of up to approx.
1,500 km around Frankfurt / Main.
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 13

Before initial use

General information

CAUTION! When choosing where to position
Place the weather station on the accompany-
ing stand .
25
Please ensure that neighbouring devices are
not operated at the same frequency of
433 MHz. Such devices may cause interfer-
ence to the radio connection.
Do not place the devices next to or on metal
plates. Otherwise the quality of radio wave
transmission may be reduced.
GB 13
30.08.13 08:34