Function Code; Representation And Description Of Function Codes - Sanken SVCO6 Instruction Manual

7. Function Code

7-1

Representation and Description of Function Codes

By changing the function code, the inverter action can be changed.
Function codes are functionally classified into "function blocks". To change the function code, first select the function
block, and then select the serial number of the function code to be changed.
A function code can be set through operation panel (see sections 5-4 and 5-5), or communication (see section 7-4).
Function
Basic Operation
Function
Input/Output-Related
Function
System-Related
Function
Special Function
Scheduled Operation
Function
LCD Display Function
PID Function
Communication
Function
Motor Parameters
Vector Control
Torque Control
Extended Function
Function Block
F10XX Basic function
Starting • braking function
F11XX
F12XX LED display function
F13XX Auxiliary function
F14XX Input function
F15XX Output function
F16XX System function
F17XX Protection function
F18XX Information function
F19XX Energy-saving function
F20XX V/f characteristics
F21XX Multi-speed function
F22XX Scheduled operation function
F23XX LCD display function
F30XX Basic PID1 function
F31XX Basic PID2 function
F32XX Combined function of PID1 and PID2
F33XX PID control parameter reading
F40XX Serial communication function
F41XX Modbus communication function
F5XXX Motor Parameters
F60XX Vector speed control function
F61XX Torque control function
F71XX Other function (for factory-adjustment)
F81XX PG sensor function
F89XX Other function (for factory-adjustment)
- 84 -
Function Block Name