Special Functions; Copy Function Operation - Sanken SVCO6 Instruction Manual

5-5

Special Functions

5-5-1

Copy Function Operation

The so-called copy function is the function which transfers the function code data to other inverters after transferring
the function code data from one inverter side to the operation panel.
The copy function is an effective function where several inverters need to be set with the same function code data.
Only 1 inverter is set, while other inverters can also receive the same function code data, thus the same function
code setting can be easily implemented.
※ The copy function can be implemented only when the inverter stops working. Therefore, this operation shall be carried out
after the inverter has been stopped.
Operation example: copying from the inverter to the operation panel
Operation
or
(press)
After transfer is
completed
*1: When the value is set to 2 or 3, then the saved contents of the operation panel will be transferred to the inverter.
And then, a flashing
See the contents of function code F1601 in [7-3 Description of Functions] for detailed description of the function and its
operation method.
Display
Select function code F1601 (copy function)
Press the
function code will be displayed.
Turn the quick knob to select 1
When F1601 = 1, the current value of the function code data
will be transferred to the operation panel (*1)
Press the
flashing
When data transfer is completed, the display will return to
function code selection interface.
will be displayed on 7-segment monitor.
- 57 -
5-5 Special Functions
Description
(Set) key or quick knob, then the set value of
(Set) key to start transferring data. And a
is displayed on 7-segment monitor.