1St Acceleration Time; 2Nd Acceleration Time; 3Rd Acceleration Time; 4Th Acceleration Time - Sanken SVCO6 Instruction Manual

7-3 Description of Functions
F1011 Reference frequency for
acceleration/deceleration
F1012

1st acceleration time

F1013

2nd acceleration time

F1014

3rd acceleration time

F1015

4th acceleration time

F1016 1st deceleration time
F1017 2nd deceleration time
F1018 3rd deceleration time
F1019 4th deceleration time
F1020 JOG acceleration/deceleration time
Four different acceleration slops and deceleration slops can be independently set according to four different acceleration
times and deceleration times. And, F1020 is the function for setting acceleration and deceleration slopes in jog operation.
Code No.
F1011 Reference frequency for
acceleration/deceleration
F1012 1st acceleration time
F1013 2nd acceleration time
F1014 3rd acceleration time
F1015 4th acceleration time
F1016 1st deceleration time
F1017 2nd deceleration time
F1018 3rd deceleration time
F1019 4th deceleration time
F1020 JOG acceleration/deceleration time
※ The representative parameters that are suitable for various models have been input.
Example) When F1011 = 50 Hz, F1012 = 5 seconds, the acceleration slope is set to 10Hz / s.
● In the V/f mode, even if the acceleration/deceleration time is set to 0 s, the actual value will still be 0.1 s.
● The 2nd thru 4th acceleration/deceleration times are selected by the combination of signals input to control input
terminals AD2 and AD3.
Function Name Data Content
1-120Hz
0 -6,500 sec.
0 -6,500 sec.
0 -6,500 sec.
0 -6,500 sec.
0 -6,500 sec.
0 -6,500 sec.
0 -6,500 sec.
0 -6,500 sec.
0 -20 sec.
- 114 -
Setting Resolution Factory Presets
0.01 Hz
0.1 s
0.1 s
0.1 s
0.1 s
0.1 s
0.1 s
0.1 s
0.1 s
0.1 s
※
※
※
0.1 s