List Of Error Operation - Sanken SVCO6 Instruction Manual

8-1 Operation Error
8-1-1

List of Error Operation

Table 8-1 List of error operation
Monitor display Description
The command cannot be set on the operation panel.
Specify the undefined function code number. (not displayed on standard operation panel)
The entered values exceed the allowable range. Or the motor parameters of F5001 (motor poles,
voltage and capacity) are not registered.
User initialization data is not registered. Please use F1604=99 to set the initial user data definition.
Cannot start with the operation panel.
The entered setting value conflicts with the optional board.
The entered setting value conflicts with the optional board.
Since the inverter is in operation, the function code data cannot be changed.
Since the operation panel is locked, the function code data cannot be changed.
Since software editions are different, the data cannot be transmitted. (copy function)
A password is required, please confirm with the sellers.
The memory content on operation panel cannot be sent to the master computer. (copy function)
Automatic testing of motor parameters cannot be carried out for the connected motor.
The current function code data cannot be sent to the operation panel. (copy function)
The function code cannot be changed because of undervoltage.
No communication between operation panel and inverter computer. Please disconnect the power
supply, and confirm the connection of operation panel and optional board. Consult the seller when the
error is displayed repeatedly.
No communication between operation panel and inverter computer. Please disconnect the power
supply, and confirm the connection of operation panel and optional board. Consult the seller when the
error is displayed repeatedly.
- 291 -