5-3
Status Display Mode
5-3
Status Display Mode
In status display mode, inverter status monitoring, alarm display, setting of each commands (frequency, speed, torque)
and operations such as running and stop of inverter can be implemented.
5-3-1
Version Display
Shortly after the power-on of the equipment, the software version of inverter will be displayed on 7-segment monitor.
The following is: display example for software version: VER 1.00.
If, for some reason, the host can not communicate with the operation panel when connected to the power, the 7-segment
monitor will display the software version of the operation panel. Now the monitor displays
5-3-2
Inverter Status Mode
The inverter status mode will be displayed.
In the operation mode display, various operation and stop states of the inverter are displayed.
Table 5-2 Display contents of operation mode
Operation Status
Stopped
Forward running
Deceleration to stop from
forward run
Forward run waiting
DC braking (forward)
Reverse running
Deceleration to stop from
reverse run
Reverse run waiting
DC braking (reverse)
Frequency locking
Position control running
(Zero-servo running)
Display Contents
REV
FWD
REV
FWD
REV
FWD
REV
FWD
REV
FWD
REV
FWD
REV
FWD
Lit
Flashing Unlit
- 48 -
.