Function Code Initialization Operation - Sanken SVCO6 Instruction Manual

5-5-3

Function Code Initialization Operation

The inverter's function code settings can be returned to factory presets through this function.
Inverter's initial value can be set to the factory preset or the data determined by the user (i.e. user's initial value).
Also, the initial value can be selected between the factory presets and the user's initial value. By setting the user's
initial value, the function code data can be initialized to the user's initial value even if it is overwritten for some
reason, allowing for resetting the function code within a minimum range.
Operation example: recovering to the factory presets
Operation
or
(press)
After
initialization
*1: In the alternate display, if an operation error occurs and it is hoped to interrupt input, then the interface can be
returned to the function code selection state by pressing the
See the contents of function code F1604 in [7-3 Description of Functions] for detailed description of the function
and its operation method.
Display
Select function code F1604 (data initialization)
Press the
function code will be displayed.
Turn the quick knob to select 1
If F1604 = 1, all the function code data will recover to the
factory presets
Pressed the
will be alternately displayed, suggesting that the settings is
being confirmed (* 1)
Press the
code. During initialization, a flashing
displayed on 7-segment monitor.
When initialization is completed, the interface will return to
function code selection.
- 59 -
5-5
Description
(Set) key or quick knob, then the set value of
(Set) key, then the set value and
(Set) key to start initialization of the function
(Back) key or key.
Special Functions
will be