Jog Frequency; 1St Start Of S-Shaped Acceleration; 1St End Of S-Shaped Acceleration; 2Nd Start Of S-Shaped Acceleration - Sanken SVCO6 Instruction Manual

ON
Input
signal
1st
F1021

JOG frequency

A function for setting frequency in JOG operation.
Code No. Function Name
F1021 JOG frequency
● Selection of the jog operation mode (control input terminals JOG-DCM1 or JOG-DCM2 are short-circuited) allows
the JOG frequency to be specified jointly by the operation panel's quick knob and stepping mode.
Note: As long as the JOG operation mode is selected, this mode takes precedence and cannot be changed to any other
multi-speed frequency.
F1022

1st Start of S-shaped acceleration

F1023

1st End of S-shaped acceleration

F1024 Gradient of middle of 1st S-shaped
Acceleration
F1025 1st Start of S-shaped deceleration
F1026 1st End of S-shaped deceleration
F1027 Gradient of middle of 1st S-shaped
deceleration
F1028

2nd Start of S-shaped acceleration

F1029 2nd End of S-shaped acceleration
F1030 Gradient of middle of 2nd S-shaped
Acceleration
F1031 2nd Start of S-shaped deceleration
F1032 2nd End of S-shaped deceleration
F1033 Gradient of middle of 2nd S-shaped
deceleration
Time
ON OFF ON OFF
OFF
ON
2nd 3rd 4th
Acceleration time
Data Content
0-60Hz
Set frequency
OFF
ON OFF ON
ON
1st 2nd 3rd 4th
Deceleration time
Setting Resolution
- 115 -
7-3 Description of Functions
Operation signal
(Operation panel or external signal)
Short-circuit between AD2 and
OFF
DCM1/2
Short-circuit between AD3
OFF
and DCM1/2
Factory Presets
0.01 Hz 5