GV58LAU User Manual
2.4. Power Connection
VIN(Red) and GND(Black) are the power input pins. The input voltage range for this device is
from 8V to 32V. The device is designed to be installed in vehicles that operate on 12V or 24V
vehicle without the need for external transformers.
2.5. Ignition Detection
Table 6: Electrical Characteristics of Ignition Detection
Logical State
Active
Inactive
IGN(White) is used for ignition detection. It is strongly recommended to connect this pin to the
ignition key "RUN" position as shown above.
An alternative to connecting to the ignition switch is to find a non-permanent power source that
TRACGV58LAUUM001
GND
VIN
Figure 3: Typical Power Connection
Electrical State
5.0V to 32V
0V to 3V or Open
IGN (White)
Figure 4: Typical Ignition Detection
9
–
–