Reduction/Enlargement/Zoom - Sharp AL-1651CS Operation Manual

REDUCTION/ENLARGEMENT/ZOOM

Copies can be reduced down to 25% or enlarged up to 400%. (When the RSPF is
being used, the zoom copy ratio range is 50% to 200%.) The [COPY RATIO] key can
be pressed to quickly select a ratio from among eight preset ratios. In addition, the
[ ] key (
1%.
1
Check the original and paper size, and place the original(s).
2
Press the [COPY RATIO] key.
3
Press the [COPY RATIO] key and/or [
(
[ENTER] key.
Selecting a preset ratio
The preset ratios change as follows each time the
[COPY RATIO] key is pressed:
"100%" → → → → "78%" → → → → "64%" → → → → "50%" → → → → "25%" → → → →
"400%" → → → → "200%" → → → → "129%".
Fine adjustment of the ratio
The ratio can be adjusted from 25% to 400% in
increments of 1%.
Use the [
fine adjustment.
Note
4
Select the number of copies and any other copy settings, and
then press the [START] key (
The copy will be delivered to the paper output tray.
28
) and [ ] key (
) to select the desired copy ratio and then press the
] key ( ) or the [
• To return the ratio to 100%, press the [COPY RATIO] key until 100%
appears.
• Press the [COPY RATIO] key to set the approximate ratio, then press
the [ ] key (
• To decrease or increase the zoom ratio rapidly, hold down the [
key ( ) or [
The ratio will stop changing at each of the preset ratios. To continue
changing the ratio, release the key and then hold it down again.
) can be pressed to select the ratio in increments of
] key (
) or [ ] key ( ).
] key ( ).
).
COPY RATIO
- 100%
] key ( ) or [
8.5x14 TO 8.5x11
- 78%
ZOOM
- 99%
) for
+
] key
+
+
]