Dell PowerConnect 5500 Series System User's Manual page 446

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Table 13-2. STP Port Settings CLI Commands (Continued)
CLI Command
spanning-tree port-priority
priority
no spanning-tree port-priority
show spanning-tree
[
[gigabitethernet|tengigabiteth
ernet] port-number
][
LAG-number
]
id
spanning-tree portfast
no spanning-tree portfast
spanning-tree bpduguard
{enable|disable}
no spanning-tree bpduguard
spanning-tree guard root
show spanning-tree [detail]
[active|blockedports] [instance
instance-id]
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 3 0 / 1 3 - F O R P R O O F O N LY
446
Dell PowerConnect 55xx Systems User Guide
Contax\sources\CxUGSwitching_STP.fm
|
port-channel
instance instance-
Description
Configures port priority.
Use the no form of this command to
restore the default configuration.
Displays spanning tree configuration.
Enables Fast Link mode.
Use the no form of this command to
disable the PortFast mode.
Shuts down an interface when it
receives a bridge protocol data unit
(BPDU).
Use the no form of this command to
restore the default configuration.
Enables root guard on all spanning tree
instances on the interface.
Displays detailed spanning tree
information on active or blocked ports.