Dell PowerConnect 5500 Series System User's Manual page 148

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Monitoring Users Using the CLI Commands
The following table summarizes the CLI commands for monitoring users:
Table 8-15. Monitoring Users CLI Commands
CLI Command
show dot1x monitoring result
[username username]
The following is an example of the CLI commands:
console# show dot1x monitoring Tom
Username: Tom
Port g1
Quiet period: 60 Seconds
Tx period: 30 Seconds
Max req: 2
Supplicant timeout: 30 Seconds
Server timeout: 30 Seconds
Session Time (HH:MM:SS): 08:19:17
MAC Address: 00:08:78:32:98:78
Authentication Method: Remote
Assigned VLAN: 207
Reason for Failure:VLAN was not defined on Switch
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 3 0 / 1 3 - F O R P R O O F O N LY
148
Dell PowerConnect 55xx Systems User Guide
Contax\sources\CxU_Switching_NetworkSecurity.fm
Description
Displays the captured information of each
interface/host on the switch/stack.