Garp Timers - Dell PowerConnect 5500 Series System User's Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell

GARP Timers

To enable a GARP timer on an interface:
1 Click Switching > GARP > GARP Timers in the tree view to open the
GARP Timers: Summary page.
Figure 12-1. GARP Timers: Summary
The GARP timers are displayed.
2 Click Edit.
3 Select an interface, and enter the fields:
GARP Join Timer (10 - 2147483640) — Enter the time, in
–
milliseconds, during which Protocol Data Units (PDU) are
transmitted.
– GARP Leave Timer (10 - 2147483640) — Enter the time interval, in
milliseconds, which the device waits before leaving its GARP state.
Leave time is activated by a Leave All Time message sent/received,
and cancelled by the Join message received. Leave time must be
greater than or equal to three times the join time.
– GARP Leave All Timer (10 - 2147483640) — Enter time interval, in
milliseconds, which all devices wait before leaving the GARP state.
The leave all time must be greater than the leave time
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 3 0 / 1 3 - F O R P R O O F O N LY
Contax\sources\CxUGSwitching_GARP.fm
Dell PowerConnect 55xx Systems User Guide
.
433