FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Triggering the Auto-Update/Configuration Process
When the Auto-Update/Configuration feature is enabled (in the Auto
Update of Configuration/Image File page), the device automatically attempts
to download a new image or configuration file (under certain circumstances)
using one of the following processes:
•
The Auto-Update process is triggered from the USB drive if a USB key in
the USB drive is found.
•
The Auto-Configuration process is triggered from the USB drive after the
Auto-Update process completed and the device was rebooted (if a new
image file was loaded), and if the following conditions are fulfilled:
–
There is a USB key in the USB drive.
–
Force Configuration Download at Next Startup has been enabled by
the boot host dhcp command, or the Startup Configuration file is
empty.
See "Performing Auto-Update from a USB Drive" on page 343.
•
The Auto-Update from a TFTP server is triggered if the following
conditions are fulfilled:
–
The conditions for a USB Auto-Update are not fulfilled.
–
An IP address of a TFTP server is received from a DHCP server.
–
A file name is received from DHCP server.
•
The Auto-Configuration from a TFTP server is triggered if the following
conditions are fulfilled:
–
The conditions for USB Auto-Configuration are not fulfilled.
–
The switch as DHCP client received a configuration file name or a
TFTP URL.
–
Force Configuration Download at Next Startup enabled by the boot
host dhcp command, or, the Startup Configuration file is empty.
See "Preparations for Using Auto Configuration from a TFTP Server" on
page 345.
NOTES:
•
DHCP client never triggers the Auto-Update process from a TFTP server
after attempting (whether successfully or not) to auto-update/configure
configuration/image file from the USB drive.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 3 0 / 1 3 - F O R P R O O F O N LY
342
Dell PowerConnect 55xx Systems User Guide
Contax\sources\CxUGSystemConfig.fm