Dell PowerConnect 5500 Series System User's Manual page 160

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
RPS — The device has one of two auxiliary power supplies:
–
Redundant Power Supply (RPS) for non-PoE devices and Modular
Power Supply (MPS) for PoE devices. Only one of these may be
present at one time. For each type of power supply, the possible
options are:
•
•
• Not Present — The power supply is currently not present.
– Temperature — Displays the temperature on the device.
– Fan Status — The device has two fans. The device constantly
measures the internal temperature, and powers the fans on/off
according to the temperature. The user can set the fans to be
constantly on. The possible options are:
•
•
normally.
– Fan Admin State — On/Auto status that user configured in the Edit
page.
– Fan Current Level — Specifies whether the fan is actually on or off.
2 The lower block displays the condition under which a fan will be turned on
or off.
– Fan Level — The on or off level.
– Condition — The temperature at which the fans will be turned on or
off. The device temperature is displayed in Celsius. The device
temperature threshold is 40 C (104 F).Table 9-2 displays the
temperature in Fahrenheit in increments of 5.
NOTE:
It is recommended to leave Fan User Level at Auto so that the fans
operate according to the temperature of the switch.
3 To control the fans on a unit, or set the default value, click Edit, and enter
the fields:
– Unit ID — Select the unit ID whose fan will be adjusted.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 3 0 / 1 3 - F O R P R O O F O N LY
160
Dell PowerConnect 55xx Systems User Guide
Contax\sources\CxUGSystemConfig.fm
Checked — The power supply is operating normally.
Unchecked — The power supply is not operating normally.
Checked — The fans are operating normally.
Unchecked — At least one of the fans is not operating