Dell PowerConnect 5500 Series System User's Manual page 294

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Source IP Address — The device IP address that is used for
–
communication with RADIUS servers.
Defining RADIUS Servers Using CLI Commands
The following table summarizes the CLI commands for defining fields
displayed on the RADIUS pages.
Table 9-51. RADIUS Server CLI Commands
CLI Command
radius-server host {ipv4-
address|ipv6-address|ipv6z-
address|hostname} [auth-port
auth-port-number] [acct-port
acct-port-number][timeout
timeout] [retransmit retries]
[deadtime deadtime] [key key-
string] [source {ipv4-
address|ipv6-address}] [priority
priority] [usage
{login|802.1x|all}]
no radius-server host {ipv4-
address|ipv6-address|hostname}
radius-server timeout timeout
no radius-server timeout
radius-server source-ip source-
ip-address
no radius-server source-ip
source-ip-address
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 3 0 / 1 3 - F O R P R O O F O N LY
294
Dell PowerConnect 55xx Systems User Guide
Contax\sources\CxUGSystemConfig.fm
Description
Specifies a RADIUS server host.
Use the no form of the command to
delete the specified RADIUS server
host.
Sets the interval for which a device
waits for a server host to reply.
Use the no form of this command to
restore the default configuration.
Specifies the source IPv4 address
that will be used for the IPv4
communication with RADIUS
servers.
Use the no form of this command to
restore the default configuration.