Dell PowerConnect 5500 Series System User's Manual page 252

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\sources\CxUGSystemConfig.fm
UDP Relay
Switches do not typically route IP Broadcast packets between IP subnets.
However, if configured, the switch can relay specific UDP Broadcast packets
received from its IPv4 interfaces to specific destination IP addresses.
To configure the relaying of UDP packets received from a specific IPv4
interface with a destination UDP port:
1 Click System > IP Addressing > UDP Relay in the tree view to display
the UDP Relay: Summary page.
Figure 9-28. UDP Relay: Summary
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 3 0 / 1 3 - F O R P R O O F O N LY
252
Dell PowerConnect 55xx Systems User Guide