Dell PowerConnect 5500 Series System User's Manual page 225

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Table 9-26. IPv6 Interfaces CLI Commands (Continued)
CLI Command
ipv6 address ipv6-
address/prefix-length link-
local
no ipv6 address link-local
ipv6 unreachables
no ipv6 unreachables
ipv6 nd dad attempts attempt
show ipv6 interface
[[gigabitethernet|tengigabite
thernet] port-number|vlan
vlan-id|port-channel LAG-
number]
show ipv6 icmp error-interval Displays the IPv6 ICMP error
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 3 0 / 1 3 - F O R P R O O F O N LY
Contax\sources\CxUGSystemConfig.fm
Dell PowerConnect 55xx Systems User Guide
Description
Configures an IPv6 link-local address for
an interface.
Use the no form of this command to
return to the default link local address on
the interface.
Enables the generation of ICMP for IPv6
(ICMPv6) unreachable messages for
packets arriving on a specified interface.
Use the no form of this command to
prevent the generation of unreachable
messages.
Configures the number of consecutive
neighbor solicitation messages that are
sent on an interface while Duplicate
Address Detection (DAD) is performed
on the unicast IPv6 addresses of the
interface.
Displays the usability status of interfaces
configured for IPv6.
interval.
225