Dell PowerConnect 5500 Series System User's Manual page 107

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\sources\CxU_Switching_NetworkSecurity.fm
– Dest. MAC Address — Match the destination MAC address to which
packets are addressed to this address. In addition to the Destination
MAC address, you can enter a Wildcard Mask that specifies which
bits in the source address are used for matching and which bits are
ignored. A wildcard of 00:00:00:00:00:00 means the bits must be
matched exactly; ff:ff:ff:ff:ff:ff means the bits are irrelevant. Any
combination of 0s and ffs can be used.
– Any — Check to indicate that the destination address is not matched.
– VLAN ID — Match the packet's VLAN ID to this VLAN ID. The
possible VLAN IDs are 1 to 4095.
– CoS — Match the packet's CoS value to this CoS value.
– Cos Mask — Match the packet's CoS value to one of these CoS
values.
– Ether type — Match the packet's Ethertype to this one.
– Time Range Name — Check to associate a time range with the ACE.
Select one of the time ranges defined in the Time Range page.
– Action — Select the action taken upon a match. The following
options are available:
Permit — Forward packets that meet the ACL criteria.
•
• Deny — Drop packets that meet the ACL criteria.
• Shutdown — Drop packets that meet the ACL criteria, and
disable the port to which the packet was addressed.
– Logging of Dropped Packets — Check to activate logging of dropped
packets.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 3 0 / 1 3 - F O R P R O O F O N LY
Dell PowerConnect 55xx Systems User Guide
107