FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Link Local Interface — When the server supports an IPv6 Link Local
–
address, this specifies the Link Local interface. The possible options
are:
•
VLAN — The VLAN on which the IPv6 interface is configured.
•
ISATAP — The IPv6 interface is configured on an ISATAP
tunnel.
3 Select one of the options:
–
Firmware Upload — A firmware file is uploaded.
–
Configuration Upload — A configuration file is uploaded.
4 Select to upload firmware or a configuration file via a TFTP server in
Download Protocol.
5 If Firmware Upload was selected, enter:
–
TFTP Server IP Address — The TFTP server IP address to which the
software image is uploaded.
–
Destination File Name (1-64 Characters) — The file name to which
the file is uploaded.
6 If Configuration Upload was selected, enter:
–
TFTP Server IP Address — The TFTP server IP address to which the
configuration file is uploaded.
Destination File Name (1-64 Characters) — The configuration file
–
name/path to which the file is uploaded.
–
Transfer File Name — The configuration file that is uploaded. The
possible options are:
•
Running Configuration — Uploads the Running Configuration
file.
•
Startup Configuration — Uploads the Startup Configuration file.
User-defined Files — Uploads the selected file. A user-defined
•
file is only displayed in this list if one was previously created by a
user, for example, if the user copied the running configuration file
to a user-defined configuration file called BACKUP-SITE-1, the
BACKUP-SITE-1 configuration file is displayed in the list and can
be selected.
7 Click Activate to start the upload process.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 3 0 / 1 3 - F O R P R O O F O N LY
358
Dell PowerConnect 55xx Systems User Guide
Contax\sources\CxUGSystemConfig.fm