Dell PowerConnect 5500 Series System User's Manual page 349

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
– Force Configuration Download at Next Startup (boot host dhcp) —
Enable/disable the Configuration Auto Update option to work even if
the Startup Configuration file is not empty.
Auto-Copy Running Configuration to Startup Configuration After
–
Download (boot host auto-save)— Enable/disable the Running
Configuration file to be automatically copied to the Startup
Configuration file after downloading the Running Configuration file.
Auto Update Configuration Using CLI Commands
The following table summarizes the CLI commands for setting fields
displayed in the Auto Update of Configuration/Image File page.
Table 9-63. Auto Update of Configuration/Image File CLI Commands
CLI Command
boot host auto-config
no boot host auto-config
boot host auto-update
no boot host auto-update
boot host dhcp
no boot host dhcp
boot host auto-save
no boot host auto-save
show boot
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 3 0 / 1 3 - F O R P R O O F O N LY
Contax\sources\CxUGSystemConfig.fm
Dell PowerConnect 55xx Systems User Guide
Description
Enables the support of auto-
configuration via DHCP .
Use the no form of this command to
disable DHCP auto configuration.
Enables the support of auto-update via
DHCP .
Use the no form of this command to
disable DHCP auto configuration
Forces the mechanism used to
download a configuration file at the
next system startup.
Use the no form of this command to
restore the host configuration file to the
default.
Enables automatic saving of Running
configuration in Startup configuration
after download.
Use the no form of this command
restore default behavior
Shows the status of the IP DHCP Auto
Config process.
349