Wired Network Settings (For Printer Models That Support Wired Network Printing); Install The Printer To Network; Control The Network Printer; View Or Change Network Settings - Pantum M6200 User Manual

4. Wired Network Settings (For printer models that
support wired network printing)
Printers that support wired network printing can be connected to the network, thereby the
printer will work under the control through a wired network.

4.1. Install the Printer to Network

Please refer to Chapter 3.1. to see the installation steps of NET Model.

4.2. Control the Network Printer

User can control the network settings through the built-in WEB Server in the printer.

4.2.1. View or Change Network Settings

1) From the printer's Control Panel, using the steps in Chapter 7.1.6., print the report of the
printer's network configuration information and check it to get the printer's IP address.
2) Type the IP address into the Web browser's address bar to access the embedded Web
server of the printer.
3) Complete the settings of the Networking Protocol, wireless network, WiFi hotspot, address
list, e-mail and other relative configuration information in the "Setting".

4.2.2. Set or Change Web Server Login Password

You can control the printer using the administrator settings.
Steps:
1) After opening the built-in WEB server, log in (default user name is admin, default password is
000000).
2) Click "Administrator Settings" to conduct corresponding operations.
4-2