Pantum M6200 User Manual page 99

4) Click on "Adjust the Scanned Image Quality" on the bottom left corner of the above picture,
the advanced properties interface will pop up, then users can set the scan; After finishing the
settings, click on the "OK" button, then "Scan" button to start scan.
2.Photoshop
Operation Steps:
1) Launch Photoshop, click "File"- "Import" on the top left conrner and select WIA Scan, as is
shown below:
2) After the window pops up, please refer to Step 3 and Step 4 of 10.2.3.1. to see the specific
operation steps.
10-12 12