Wifi Hotspot Configuration; Turn Off The Wireless Connection - Pantum M6200 User Manual

5.3. WiFi Hotspot Configuration

When the wireless hotspot of printer is active, the user can connect to it directly by searching.
The wireless hotspot is enabled by default, and the default password is "12345678". The
printer-specific SSID and password can be obtained from WiFi Configuration Information
Page, which can be printed out by selecting Print WiFi Configuration. After establishing the
connection, the configuration can be completed according to the Web configuration method.

5.4. Turn off the Wireless Connection

If you want to disconnect the printer with the wireless network, you can turn off the wireless
device in the printer.
1) Users can disconnect the wireless network by pressing the "WiFi" button on the printer's
control panel for over 2 seconds.
2) To verify whether turn off successfully or not, users can check whether the WiFi button is
on or not ,or print the network configuration information to check the wireless network status.
5-5