9. Copy
9.1. Basic Operations
The printer offers two modes of copying, namely, copying with the tablet and copying with the
automatic document feeder. The operation procedure is as follows:
9.1.1. Copying With Tablet
One sheet is scanned at a time when you use copying with tablet. Then the scanned image is
printed out after which the next copy can start. The basic procedure for copying with tablet is
as follows:
1. Put the manuscript face down into the glass platen.
M6200/M6500 Series
Note:
• During copying, please do not open the cover to avoid any adverse impact on the
image quality.
• For the information on "Steps of Using Paper and Manuscript", please refer to
Chapter 2.5.
2. Press Copy button on the control panel, press OK to enter the settings interface for normal
copy mode.
M6200/M6500/M6550 Series
Note:
• The printer will enter normal copy mode automatically when it starts up or restarts..
3. Press direction pad "▲" or "▼" to select "1. Image Quality", "2. Luminosity", "3. Zoom", "4.
N-in-1", "5. Clone", "6. Poster", "7. Collate", "8. Manual Duplex", or "9. Paper Setting" to set
the copy.
4. Press "Start" button to start copy.
M6550/M6600 Series
M6600 Series
9-2