Control Panel - Pantum M6200 User Manual

1.6. Control Panel

M6200/M6500/M6550 Series
1 WiFi button
Power Saving/
2
Wake-up Button
3 Status Light
4 Scan Button
5 Copy Button
6 ID Card Copy Button
7 Bill Copy Button
8 Menu Button
9 Back Button
10 Cancel Button
11 Start Button
12 OK Button
13 "▲ " and "▼ "
This button indicates the WiFi connection status (only
applicable to WiFi Model).For Non-WiFi Model,this button is for
toner saving.
Press this button to switch to power saving status or wake the
machine from power saving status
This light indicates the ready, alarm and other status of the printer
Green light: Normal
Orange light: Warning
Red Light: Error
Press this button to enter into scan mode
Press this button to enter into copy mode
Press this button to enter into ID Card Copy mode
Press this button to enter into Bill Copy mode
Press this button to access the menu options to make the
settings
Press this button to go back to the upper-level page
Press this button to cancel the operation
Press this button to start the corresponding operation after the
operation setting
Press this button to save the setting
Press these two buttons to browse each menu and its options
1-10 10