When The Printer Does Not Operate Properly - Canon lpb3360 User Manual

When the Printer Does Not Operate Properly

If the printer does not operate even after turnig it ON or print Configuration Page
Print properly, the following causes are conceivable.
Symptom
2
The printer cannot
be turned ON.
The indicators on
the control panel do
not come on.
The printer does
not operate.
A paper jam occurs
each time you print.
2-32 Turning the Printer ON and Checking the Printer Operation
Downloaded from ManualsPrinter.com Manuals
Cause
The power plug is unplugged from
the AC power outlet.
There is a break in the power
cord.
The printer is not turned ON.
The printer is in Power Save
Mode.
The printer is offline.
The interface cable is
disconnected.
The amount of the paper loaded
in the paper cassette or manual
feed slot exceeds the load
limitation.
Paper is not loaded properly in
the paper cassette or manual
feed slot.
Unusable paper is loaded in the
paper cassette or manual feed
slot.
There is still jammed paper inside
the printer.
Remedy
Plug the power plug into the AC
power outlet.
If the printer is turned ON after
replacing the power cord with the
one that is of the same type and
is used for other device, there is a
break in the power cord. In this
case, purchase a new power cord
and replace it with the broken
one.
Turn the printer ON.
The printer will be ready to print
after you send print data or press
any key on the control panel.
Press the (Online) key to turn
on the (Online) indicator.
Connect the interface cable firmly
to the interface connectors on the
computer and printer unit.
Reduce the amount of paper to
within the load limitation and print
again.
Load the paper properly and print
again.
Replace the paper with one that
can be used and print again.
Remove any jammed paper and
print again.