Canceling A Job; Outputting Data (Forced Output); Canceling A Job (Cancel Job) - Canon lpb3360 User Manual

Canceling a Job

When a part of print data has already been sent to the printer, the print job may not
be finished even if you cancel the job from the computer. In this case, you can
output the data to finish the printing process of the printer or cancel the job being
processed in the printer or all the jobs.

Outputting Data (Forced Output)

3
When a job is canceled from the computer or the data is less than one page, the
data may remain in the printer memory, and the job may not be completed properly.
As long as the printer remains in this state, you cannot print the next job because
the printer cannot receive the next data. In this case, force the printer to output the
print data using the following procedure.
IMPORTANT
Print data from PCL/UFR II Printer Driver cannot be output.
•
If you have output data, the data being printed is deleted. Print the data from the
•
computer again as needed.
You cannot output data while the
•
received data, perform a soft reset. (See p. 3-8)
NOTE
The
•
no print data remains in the printer but a job has not yet been completed.
If MODE TIMEOUT is specified for the job, even data less than one page is output when
•
the specified time has elapsed (Data from PCL/UFR II Printer Driver is not output.).
MODE TIMEOUT for a job is set to 15 seconds in the default settings.
If the
•
reset. (See p. 3-8)
1
3-6 Canceling a Job
Downloaded from ManualsPrinter.com Manuals
(Job) indicator is on when any print data remains in the printer memory or when
(Job) indicator does not go off even after outputting the data, perform a soft
Press the (Reset) key.
RESET
SOFT RESET
The RESET menu is displayed.
(Message) indicator is on. If you want to delete the
→