Canon lpb3360 User Manual page 284

The overall print result is dark.
Cause 1
Remedy
Cause 2
Remedy
The print is uneven.
Cause 1
Remedy
Cause 2
Remedy
Cause 3
Remedy
The front or back of the printed paper has smudge marks
Cause
Remedy
A portion of a page is not printed.
Cause 1
Remedy 1 Clear the [Manual Scaling] check box in the printer driver. If the check box is
Downloaded from ManualsPrinter.com Manuals
The setting for the toner density is not appropriate.
Adjust DENSITY (See p. 6-24) in the QUALITY MENU options in the SETUP
menu.
The printer is exposed to direct sunlight or strong light.
Move the printer to a place where it will not be exposed to direct sunlight or
strong light. Alternatively, move the strong light source away from the printer.
Toner in the toner cartridge is running out.
Take the toner cartridge out of the printer, shake it gently 5 or 6 times to evenly
distribute the toner, and then reinstall the toner cartridge. If this does not solve
the problem, replace the toner cartridge with a new one. (See "Replacing the
Toner Cartridge," on p. 7-2)
Paper is too moist or too dry.
Replace the paper with appropriate one and print again. (See "Paper
Requirements," on p. 4-2)
The toner cartridge has deteriorated or is damaged.
Replace the toner cartridge with a new one. (See "Replacing the Toner
Cartridge," on p. 7-2)
The fixing roller is dirty.
Clean the fixing roller. (See "Cleaning the Fixing Roller," on p. 7-19)
The scale factor is incorrect.
cleared, the scale factor will be set according to [Page Size] and [Output Size]
automatically.
In order to specify the setting for [Manual Scaling], display the [Page Setup]
sheet.
When You Cannot Obtain Appropriate Printout Results
8
8-47