Canon lpb3360 User Manual page 273

<FM SCALE ERROR>
Cause
Remedy
<PC LOAD "size">
Cause
Remedy 1 Load the paper of the size selected in the application (or the one specified by
Remedy 2 If you are using the manual feed slot, check SLOT PAPER SIZE, and when the
Remedy 3 Press the
Remedy 4 Press the
8
IMPORTANT
If you open the front cover when the message <PC LOAD "size"> is displayed, the
message may disappear. However, be sure to follow the directions in the displayed
message to change the paper.
8-36 Message List
Downloaded from ManualsPrinter.com Manuals
There is a character in which the number of coordinate points on the contour
lines exceeds the limitation of a pseudo-scalable font.
Perform "Error Skip", then continue printing. However, the characters with which
an error has occurred are not printed properly.
The paper of the size specified in the application is not loaded in the paper
cassette or manual feed slot, or the paper source for the different paper size is
selected.
scaling factors). (See "Printing from the Paper Cassette," on p. 4-19)
paper size does not match the size specified in the application, specify the
setting properly. (See "Printing from the Manual Feed Slot," on p. 4-37)
(Feeder Selection) key, then select the paper cassette in which the
paper of the matched size is loaded. (See "Selecting a Paper Source," on p.
4-12)
(Online) key, then print to the currently loaded paper forcibly. If
you are using the manual feed slot, the setting for SLOT PAPER SIZE
automatically changes to the setting specified in the application.
<Auto Error Skip>