Canon lpb3360 User Manual page 118

- When the paper is loaded in portrait orientation: CUSTOM SIZER
When you change the paper loaded in the paper cassette frequently, it is convenient if
•
you set CASSETTE1 SIZE and/or CASSETTE2 SIZE to MIXED SIZES. When
CASSETTE1 SIZE and/or CASSETTE2 SIZE is set to MIXED SIZES, you do not need to
specify the settings for CASSETTE1 SIZE and/or CASSETTE2 SIZE each time the
different size paper is loaded. However, observe the following when specifying MIXED
SIZES.
- Make sure that the size of the paper loaded in the paper cassette matches the paper
- When printing from UFR II Printer Driver, you can load paper either in portrait or
NOTE
The names of the following paper sizes are indicated by an abbreviation.
Legal: LG, Letter: LT, Executive: EX, Custom Size: 80 to 99, Custom SizeR: 80R to 99R,
Free/Mixed Sizes: FR
1
2
3
Downloaded from ManualsPrinter.com Manuals
size specified in the printer driver before printing. If they do not match the printer may
stop printing, displaying the message <41 CHK PAPER SZE>, or a paper jam may
occur. Be sure to check if the paper size specified in the printer driver matches the size
of the paper loaded in the paper cassette before using the printer. However, if SPECIAL
MODE J is set to ON, the printer prints without checking the paper size even when the
paper size specified in the printer driver and the size of the paper loaded in the paper
cassette do not match. For more details, see "SPECIAL MODE J," on p. 6-31.
landscape orientation. However, when printing custom size paper of its long edges
215.9 mm or less, load the paper in landscape orientation. When you are not using
UFR II Printer Driver, load the paper in portrait orientation.
Press the (Settings) key.
SETUP
CONTROL MENU
Select FEEDER MENU using [
FEEDER MENU
SLOT PAPER SIZE→
Select CASSETTE1 SIZE or CASSETTE2 SIZE using [
[ ], then press [OK].
CASSETTE1 SIZE →
=A4
→
] and [ ], then press [OK].
→
→
Printing from the Paper Cassette
4
] and
4-35