Canon lpb3360 User Manual page 268

<30 MEMORY FULL>
Cause
Remedy
<32 2-SIDED ERROR>
Cause
Remedy 1 The printer continues printing by pressing the
Remedy 2 After performing a soft reset in the RESET menu, change the setting to a paper
<33 WORK MEM.FULL>
Cause
Remedy 1 The printer continues printing by pressing the
IMPORTANT
When you continue printing by pressing the
macro that is already registered may be deleted.
Remedy 2 Perform a soft reset in the RESET menu, increase the free space of RAM using
<35 TABLE FULL>
Cause
Remedy
<38 LOW IMGE QLTY>
Cause
Remedy 1 The printer continues printing by pressing the
Downloaded from ManualsPrinter.com Manuals
The work memory has run out while the system is processing the data.
The printer continues printing by pressing the
data with which an error has occurred may not be printed properly.
The printer received 2-sided printing data of paper sizes (including the
orientation) or paper types unavailable for automatic 2-sided printing.
data on each side is printed on two pages.
size or type available for automatic 2-sided printing, and then print again.
The work memory for each operation mode cannot be secured.
data with which an error has occurred is not printed properly.
the following procedure, and then print again.
Perform a hard reset or cycle the power of the printer (Be aware that all the
•
data in the memory that the printer has received will be deleted).
The number of the documents in a job has exceeded 16.
The printer continues printing by pressing the
job with which an error has occurred is not printed.
The printer cannot process the data because it is too complicated.
printer prints with the image quality level being lowered.
<Auto Error Skip>
(Online) key. However, the
<Auto Error Skip>
(Online) key. However, the
<Auto Error Skip>
(Online) key. However, the
(Online) key, be aware that the data of
<Auto Error Skip>
(Online) key. However, the
<Auto Error Skip>
(Online) key. However, the
Message List
8
8-31