Canon lpb3360 User Manual page 272

<D8 VERSION ERROR>
Cause
Remedy
<D8 SYNTAX ERROR>
Cause
Remedy 1 Press the
Remedy 2 Confirm the data to be printed, then print again.
<D8 nn ERROR> ("nn" represents two-digit alphanumeric characters)
Cause
Remedy
<F9-nn PWR OFF>ON> ("nn" represents two-digit alphanumeric characters)
Cause
Remedy
<FF FONT FULL>
Cause
Remedy
<FM SIZE ERROR>
Cause
Remedy
Downloaded from ManualsPrinter.com Manuals
You tried to print from a printer driver that is not for LBP3360.
Print from the printer driver for LBP3360.
Invalid data is sent when printing using UFR II Printer Driver.
(Online) key to continue printing from the next data. However, the
page with which an error has occurred and its subsequent pages are not
printed.
A problem has occurred and the printer does not operate properly.
Cycle the power of the printer. If the message appears even after cycling the
power of the printer, note down the message in the display, and contact your
local authorized Canon dealer.
A problem has occurred while the printer is processing print data.
Cycle the power of the printer. If the message appears even after cycling the
power of the printer, note down the message in the display, and contact your
local authorized Canon dealer.
Because of too many fonts to be registered, the field (font table) for registering
font information has run out and overflowed.
The printer continues printing by pressing the
page with which an error has occurred is not printed properly.
There is some font with its size exceeds the pseudo-scalable font size.
Perform "Error Skip", then continue printing. However, the characters with which
an error has occurred are not printed properly.
<Auto Error Skip>
(Online) key. However, the
<Auto Error Skip>
Message List
8
8-35