Installing The Paper Feeder; Removing The Packing Materials - Canon lpb3360 User Manual

Installing the Paper Feeder

The paper feeder is to be installed at the bottom of the printer unit.
WARNING
Be sure to turn the printer OFF, unplug the power plug, and then disconnect all
the interface cables and power cord from the printer before installing the paper
feeder. Otherwise, the power cord or interface cables may be damaged,
resulting in a fire or electrical shock.
IMPORTANT
Do not touch the connector (A) in the paper feeder. This may result in damage to the
•
printer or misfeeds.
9
If you are printing from Cassette 2, make sure that Cassette 1 is installed before printing.
•
If you print from Cassette 2 when Cassette 1 is not installed, this will cause paper jams.

Removing the Packing Materials

The paper feeder is provided with tape and a packing material to be protected from
excessive vibrations and shocks during delivery. Remove the tape and packing
material before installing the paper feeder on the printer.
IMPORTANT
If there is any packing material remaining inside the paper feeder, this may result in
•
misfeeds or damage to the printer when operating the printer. Be sure to remove all the
packing materials following the procedure.
The removed packing materials are required when transporting the printer for relocation
•
or maintenance. Keep them where they will not get lost.
9-2

Installing the Paper Feeder

Downloaded from ManualsPrinter.com Manuals
(A)