Remedy 2 Select the [Manual Scaling] check box in the printer driver, then specify an
Cause 2
Remedy
Cause 3
Remedy
The paper is printed completely black.
Cause
Remedy
Toner does not fix well.
Cause
Remedy
8
The back of the printed paper has smudge marks.
Cause
Remedy
8-48
When You Cannot Obtain Appropriate Printout Results
Downloaded from ManualsPrinter.com Manuals
appropriate scale factor according to the paper size to be used.
In order to specify the setting for [Manual Scaling], display the [Page Setup]
sheet.
The position of the paper is incorrect.
Load the paper properly. (See "Loading Paper in the Paper Cassette," on p.
4-21, "Loading Paper in the Manual Feed Slot," on p. 4-38)
A document with no margins was printed.
Secure a margin around the data so that it fits within Printable Area (See p.
4-7), then print again.
The drum in the toner cartridge has deteriorated.
Replace the toner cartridge with a new one. (See "Replacing the Toner
Cartridge," on p. 7-2)
Paper is inappropriate.
Replace the paper with one that can be used with this printer. (See "Paper
Requirements," on p. 4-2)
The size of the print data was larger than that of the loaded paper.
Check if the size of the print data matches that of the loaded paper.