Panasonic KX-NS1000 User Manual page 336

3.2.1 User Programming
Customising the Flexible Buttons
You can customise the flexible buttons on PTs, Add-on Key Modules, PSs, KX-UT133/KX-UT136/KX-UT248/
KX-UT670 SIP phones, and S-PSs. They can then be used to make or receive outside calls or as feature
buttons.
Button
Loop-CO (L-CO)
Group-CO (G-CO)
Single-CO (S-CO)
Direct Station Selection
(DSS)
336 User Manual
2. The available speed dialling numbers are shown in sets
of 20. Select the desired set from Index.
3. Enter the name of the Personal Speed Dialling number
to call in Speed Dialling - Personal Name (max. 20
characters).
4. Enter the number to be dialled by the Personal Speed
Dialling number in Speed Dialling - Personal Number
(max. 32 digits consisting of 0–9,
[Secret], P [Pause], and F [Flash]).
5. Click OK.
1. In the Telephony Feature tab, click Flexible Button
View/Edit.
2. To set the flexible buttons, specify each button on the
Flexible Button screen.
Follow the table below to set each parameter. When you
finish, click OK.
Select Loop CO from Type.
To specify the ring tone, select the ring tone type from Optional Parameter
(Ringing Tone Type Number).
Select Group CO from Type.
Then specify the outside line group number in Parameter Selection.
To specify the ring tone, select the ring tone type from Optional Parameter
(Ringing Tone Type Number).
Select Single CO from Type.
Then specify the outside line number in Parameter Selection.
To specify the ring tone, select the ring tone type from Optional Parameter
(Ringing Tone Type Number).
Select DSS from Type.
Then enter the extension number in Extension Number.
, #, T [Transfer], [ ]
Steps