Table of Contents
Advertisement
Global Mode
RESET
Select the object that you wish to delete and press the delete soft button.
CAUTION:
them from the Forte SE. If you wish to load the object back into the Forte
SE in the future, ensure that you save the object to a USB device (such
as a thumb drive) or computer/tablet before deleting them.
RESET
Press the Reset soft button to view the Global Reset page, where you can choose to reset the
Forte SE to its original factory settings. This restores all Global mode settings to their factory
defaults, and deletes all user Programs and Multis.
CAUTION:
changes that can not be reversed. Kurzweil recommends that you save
(STORE) any user objects that you wish to keep (such as user Programs
and Multis) before performing a reset on the Forte SE.
Press the RESET button to enter the reset process. You can CANCEL at any time if you are
unsure, or do not want to proceed.
All User objects (Programs, Multis, Chains, et cetera) will be permanently erased. This
cannot be undone. Make sure you have used the Store function to backup all of the user
objects that you wish to keep. All Global Mode parameters will be reset to default settings.
12-18
Be aware that deleting user objects will permanently remove
Be aware that performing a reset on the Forte will result in
Advertisement
Table of Contents
